+1 866 300 9012   contact@measur.ca
SHOPPING CART

No Products in the Cart

TOTAL:
$0.00

NDAA-Compliant Drones

Carrier H6 Hybrid

The Carrier H6 Hybrid EFI offers unparalleled payload versatility for long-duration mission profiles. Built around a highly efficient electronic fuel injection system, it eliminates range anxiety and minimizes downtime.


This system arrives ready to plug-and-play, maintaining the H6 family's hallmark ability to convert to all-electric or hydrogen-electric power formats in minutes — one airframe, three power systems.

5 KG

Max Payload

240 MIN

Max Flight Time

6.5 L

Fuel Capacity

2.4 KW

Continuous Power

Architecture | Unparalleled Modularity | One Airframe. Three Power Formats


Built on Harris Aerial's flagship H6 hexacopter frame. The robust airframe folds down to a fraction of its flight-ready size for easy transport, then secures into mission-ready position in minutes.


Despite its gas-electric powertrain, the airframe remains fully convertible to all-electric or hydrogen-electric power formats — a single chassis, every mission profile.


Exceptional MTOW to Structural Mass Ratio: the airframe weighs just 14.5 kg (32 lbs) empty while supporting a massive 25 kg (55 lbs) Maximum Takeoff Weight (MTOW), ensuring maximum power is dedicated to your payload.

Foldable Airframe

Modular Power

15 M/S Max Speed

Rapid Conversion

Payload | Superior Integration| 8 KG of Mission-Ready Capacity


Equipped with a dampened modular quick-release mounting system and a 19-Pin Universal Payload Connector, the H6 Hybrid EFI handles up to 5 kg (11 lbs) of professional payloads.

The Universal Payload Connector delivers integrated power (48V, 24V, 12V, 5V) and data signals (UART, Ethernet, CAN, USB, GPIO) through a single connection — ready for any high-value sensor, gimbal, or instrument package in the Harris payload library.

5 KG Max Payload

Quick-Release Mount

Power: 48V | 24V | 12V | 5V

Universal Connector

Data: UART · ETH · CAN · USB · GPIO

Power System | High-Endurance EFI (Electronic Fuel Injection) | 2.4 kW of Continuous Power


Powered by the highly efficient H2400 EFI 2-stroke generator yielding 2.4 kW of continuous power. Operating with a 6.5 L fuel tank capacity (optimally tested at 4 L with maximum 5 kg payload), the intelligent system monitors fuel consumption in real-time along with RPM, generator power output (watts), current and voltage, cylinder head temperature, throttle, and run-time-until-maintenance — for reliable, multi-hour performance.

2x 6S1P LiPo backup battery packs provide up to 5 minutes of redundant battery power for safe recovery in the unlikely event of a generator interruption.

2.4 kW Generator

Electronic Fuel Injection

Real-Time Generator Telemetry

Unleaded 93 Octane or Higher

Deployability | Rapid Field Execution | Reliable Electronic Fuel Injected Engine


The 2-stroke engine is fueled electronically by a proprietary EFI (electronic fuel injector), allowing operators to focus on mission success while the generator does the hard work modifying fuel flow for varying elevations and weather conditions. No more turning mechanical needles for tuning during varying weather conditions and flight environments.

Layered radio, battery, and fuel failsafes ensure safe recovery in any failure scenario. NDAA compliant for federal and defense deployments.

Generator Telemetry

Sub-2 Min Deploy

Fuel Failsafes

Dual RTK GNSS

NDAA Compliant

Full Technical Specifications

Generator & Powerplant

Engine Model

H2400 EFI Generator

Continuous Power

2.4 kW

Fuel Type

Unleaded 93 Octane

Fuel Tank Capacity

6.5 L

Fuel Injection

Electronic (EFI)

Fuel-Flow Sensor

Real-Time, High-Accuracy

Backup Battery

6S2P LiPo (2x 5,000 mAh)

Backup Endurance

5 min redundancy

ORIGIN

Made in USA

Airframe & Performance

Frame Type

Hexacopter (Foldable)

Max Horizontal Speed

15 m/s (33.6 mph)

Max Vertical Speed

2.5 m/s (5.6 mph)

Service Ceiling

2,000 m (6,562 ft) AMSL

Max Flight Time

240 min (no payload)

Max Takeoff Weight

25 kg (55 lbs)

Empty Weight

14.5 kg (no fuel)

Propellers

Carbon Fiber w/ Aluminum Hub

IP Rating

IP43

Command, Control & Safety

Flight Controller

Cube Orange (Custom ArduPilot)

Radio Frequencies

2.4 GHz ISM / 902-928 MHz

IMU Redundancy
Triple Redundant IMU

Failsafes

Radio, Battery & Fuel

Ground Control

Harris C-GCS / HereLink

Generator Telemetry

Stop / Idle / Run states

Fuel Telemetry

Real-Time Fuel & Flow

Engine Telemetry

Real-Time Temp & RPM

Complaince

NDAA Compliant

Payload Interface

Mount Type

Universal Quick-Release

MAX Payload

5 kg (11 lbs)

AUX Power Out

5.3V / 12V / 24V / 48V

Power Source

Continuous Generator Bus

Mount Compatibility

Universal Payload Connector

Compatibility

Professional Equipment Library

Mission Profiles

Built for Long-Duration Work

When the mission outlasts a battery charge, the H6 Hybrid EFI keeps flying.
Multi-hour endurance unlocks operational profiles that all-electric platforms simply cannot reach.


Extensive Area Operations

Unprecedented flight times make this the premier choice for large-scale, long-duration automated grid assignments — covering hundreds of acres in a single sortie.

Heavy Duty Deployments

With a 5 kg capacity, effortlessly carry heavy professional equipment and multi-sensor arrays without sacrificing necessary flight times.

Remote & Hazardous Deployments

Gasoline logistics enable continuous field operations in remote environments where traditional battery-charging infrastructure is unavailable or unreliable.

Persistent Surveillance

Multi-hour station-keeping for critical infrastructure monitoring, perimeter surveillance, and federal mission support — uninterrupted by battery swap intervals.

Product Literature

Download the H6 Hybrid
Product Brochure

Full technical specifications, payload compatibility matrix, power-format options, and ordering information — in a single field-ready PDF.


Get in Touch

Give us a call or drop by anytime, we will answer all enquiries within 24 hours on business days. We will be happy to answer your questions.

Contact Information

We would love to hear from you! Our team is always here to help.

  • +1 866 300 9012

  • contact@measur.ca

  • Vancouver, British Columbia

    Calgary, Alberta

    Mississauga, Ontario

    Montreal, Quebec

Name*:

Phone*:

Company*:

Email*:

Message:

BACK TO TOP